新闻中心-江阴市鸿飞金属制品有限公司

PRODUCTS

Recommend

PRODUCTS Click
PRODUCTS Click
PRODUCTS Click
PRODUCTS Click
PRODUCTS Click
PRODUCTS Click

位置：首页 > > NEWS

302020-05

What is the relationship between the specifications of the aluminum extrusion press and the diagonal of the profile cross-section?
The tonnage of the extruder is calculated according to the size of the extrusion force, and the tonnage represents the extrusion force. Common ones are 500t, 630t, 800t, 1000t, 1200t, 1800t, 2500t, etc. The more the tonnage...
302020-05

Analysis of Metal Flow and Die for Aluminum Extrusion Production
The ingot flow behavior of the horizontal extruder in the filling and extrusion stage is similar to that of the vertical one, but the ingot on the horizontal extruder will inevitably come into surface contact with the extrusion cylinder due to its own weight in the extrusion cylinder, and will be in contact with the extrusion cylinder with the filling. As the process continues, the contact surface between the ingot and the extrusion cylinder is getting larger and larger, and the industrial alumi
302020-05

Improving the quality of aluminum alloy extrusion press can start from the following points
1. The working belt must be ground and polished before the mold is put on the machine, and the working belt is generally required to be polished to a mirror surface. The flatness and verticality of the mold working belt should be checked before assembling the industrial aluminum profile. The quality of nitriding determines the polishing finish of the working belt to a certain extent. The mold cavity must be cleaned with high-pressure air and a brush, and there should be no dust or impurities.
302020-05

What factors affect the quality of aluminum oxide film?
The quality of the aluminum oxide film is affected by many factors. If you don't pay attention to these factors, it may affect the quality of your aluminum oxide film. Next, what are the factors that affect the quality of the aluminum oxide film?
302020-05

The source of ash on aluminum surface
In the aluminum surface treatment process, ash removal is a necessary step, and many manufacturers also attach great importance to the ash removal and neutralization process. So, how is the ash on the aluminum surface produced? What are the solutions?

PRODUCTS

Recommend

The tonnage of the extruder is calculated according to the size of the extrusion force, and the tonnage represents the extrusion force. Common ones are 500t, 630t, 800t, 1000t, 1200t, 1800t, 2500t, etc. The more the tonnage...

The quality of the aluminum oxide film is affected by many factors. If you don't pay attention to these factors, it may affect the quality of your aluminum oxide film. Next, what are the factors that affect the quality of the aluminum oxide film?

In the aluminum surface treatment process, ash removal is a necessary step, and many manufacturers also attach great importance to the ash removal and neutralization process. So, how is the ash on the aluminum surface produced? What are the solutions?

Jiangyin Hongfei Metal Products Co., Ltd.